Jean:

This is one of those experiences that may be exactly what you need, or may
also result in gales of laughter.

I had a similar need, to glue my rear view mirror to my windshield, in a non-
standard position.   I solved the problem by using standard Dow RTV silicone,
BUT, in order to get it to adhere, I had to roughen the surface of the glass,
using emery paper.

Now, using emery paper on your parts may be difficult, or impractical, and so
my suggestion is use a mild glass etch, which could be a simple 10% solution
of ammonium biflouride, which you could put on with a cotton swab.   Rinse
well, then dry, and apply your silicone.

Hope it works for you.

Rudy Sedlak
RD Chemical Company

################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe:   SUBSCRIBE TechNet <your full name>
To unsubscribe:   SIGNOFF TechNet 
################################################################
Please visit IPC web site (http://jefry.ipc.org/forum.htm) for additional information.
For the technical support contact Dmitriy Sklyar at [log in to unmask] or 847-509-9700 ext.311
################################################################