Tom,

I can't agree with you LESS on this! Enough said! If you happen to need
some help, and maybe have been unable to get it from support or from
SourceLink, please call me and I can give you a hand, FREE OF CHARGE!
I completely disagree with your claims, and I have been on it just as long.

Mitch Morey
(619)657-5338
San Diego CA

>>> Tom Kropski <[log in to unmask]> 05/08/98 08:35am >>>
I've been using Cadence for 6 years for pcb design and would not
recommend
it to anyone unless you have a staff to support you.  On the schematic
side,
library maintenance is terrible, and the interface to allegro is poor.
Allegro does the job, but not as friendly as many other packages.  I'd give
Pads a strong serious look.

Tom

-----Original Message-----
From: Karl J. Bates <[log in to unmask]>
To: [log in to unmask] <[log in to unmask]>
Date: Thursday, May 07, 1998 9:51 AM
Subject: Re: [DC] what cad software is better.


>If I had a choice, I would choose Cadence.   Unfortunately that
>wasn't on your list.... Then I would choose based on the type
>of PCB's you are designing.   I am currently using Mentor Graphics
>and I have disliked it for 3 years now.  Mentor would be my last
>choice.  If you have to use a Mentor database look at
>http://www.intercept.com
>That is Pantheon.
>
>
>Karl
>
>################################################################
>DesignerCouncil E-Mail Forum provided as a free service by IPC using
LISTSERV 1.8c
>################################################################
>To subscribe/unsubscribe, send a message to [log in to unmask] with
following
text in the body:
>To subscribe:   SUBSCRIBE DesignerCouncil <your full name>
>To unsubscribe:   SIGNOFF DesignerCouncil
>################################################################
>Please visit IPC web site (http://jefry.ipc.org/forum.htm) for additional
information.
>For the technical support contact Dmitriy Sklyar at [log in to unmask] or
847-509-9700 ext.311
>################################################################
>

################################################################
DesignerCouncil E-Mail Forum provided as a free service by IPC using
LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with
following text in the body:
To subscribe:   SUBSCRIBE DesignerCouncil <your full name>
To unsubscribe:   SIGNOFF DesignerCouncil
################################################################
Please visit IPC web site (http://jefry.ipc.org/forum.htm) for additional
information.
For the technical support contact Dmitriy Sklyar at [log in to unmask] or
847-509-9700 ext.311
################################################################

################################################################
DesignerCouncil E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe:   SUBSCRIBE DesignerCouncil <your full name>
To unsubscribe:   SIGNOFF DesignerCouncil 
################################################################
Please visit IPC web site (http://jefry.ipc.org/forum.htm) for additional information.
For the technical support contact Dmitriy Sklyar at [log in to unmask] or 847-509-9700 ext.311
################################################################