W.L. Gore can be reached at the following address:

W.L. Gore and Associates, Inc.
Electronic Products Division
1320 Appleton Road PO Box 809
Elkton, MD 21922-0809

Phone: (800)255-4673
Fax:   (410)996-3879

Regards,

====================================================================
Steve Trasatto                       Senior Designer
Ericsson Enterprise Networks         email: [log in to unmask]
7001 Development Drive               voice: (919) 472-7583
P.O. Box 13969                       fax:   (919) 472-6515
Research Triangle Park, NC 27709
====================================================================

> From [log in to unmask] Sat May  2 22:05 EDT 1998
> MIME-Version: 1.0
> Content-Transfer-Encoding: 7bit
> X-Priority: 3
> X-MSMail-Priority: Normal
> X-MimeOLE: Produced By Microsoft MimeOLE V4.71.1712.3
> Date:         Sun, 3 May 1998 07:40:24 +0530
> From: "S.L.N.MURTHY" <[log in to unmask]>
> Subject:      Re: [DC] FR4 material/Rogers material compatibility?
> X-To:         Lwallig <[log in to unmask]>
> To: [log in to unmask]
>
> Dear Mr. Lwalling
>
> I would appreciate if you can tell me where we can get details of the Gore
> SPEEDBOARD prepreg materials. Do they have a web site or can u give us their
> mailing address or FAX for correspondence.
>
> We are a design bureau in India always looking for this information. Any
> help would be appreciated.
>
> Regards
>
> Murthy S.L.N.
> Managing Director
> ECAD Technologies Pvt.Ltd.
> 373/1a, Eleventh Cross, Seventh Main,
> Second block, Jayanagar
> Bangalore 560 011
> INDIA
>
> FAX 91 80 663 0738
> PH:   91 80 663 2779
>                80 64179
> email: [log in to unmask]
>
> -----Original Message-----
> From: Lwallig <[log in to unmask]>
> To: [log in to unmask] <[log in to unmask]>
> Date: 01 May 1998 23:46
> Subject: Re: [DC] FR4 material/Rogers material compatibility?
>
>
> >For what it is worth, the Gore SPEEDBOARD prepreg materials (epoxy and
> cyanate
> >ester) are very compatible with Rogers 4003, 4350 etc as well as FR-4 and
> >might be considered as the bonding sheets for those multilayer designs that
> >need a lower dielectric constant or thinner PWBs for controlled impedance
> >layers or higher signal speeds.
> >
> >################################################################
> >DesignerCouncil E-Mail Forum provided as a free service by IPC using
> LISTSERV 1.8c
> >################################################################
> >To subscribe/unsubscribe, send a message to [log in to unmask] with following
> text in the body:
> >To subscribe:   SUBSCRIBE DesignerCouncil <your full name>
> >To unsubscribe:   SIGNOFF DesignerCouncil
> >################################################################
> >Please visit IPC web site (http://jefry.ipc.org/forum.htm) for additional
> information.
> >For the technical support contact Dmitriy Sklyar at [log in to unmask] or
> 847-509-9700 ext.311
> >################################################################
> >
> >
>
> ################################################################
> DesignerCouncil E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
> ################################################################
> To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
> To subscribe:   SUBSCRIBE DesignerCouncil <your full name>
> To unsubscribe:   SIGNOFF DesignerCouncil
> ################################################################
> Please visit IPC web site (http://jefry.ipc.org/forum.htm) for additional information.
> For the technical support contact Dmitriy Sklyar at [log in to unmask] or 847-509-9700 ext.311
> ################################################################
>
>

################################################################
DesignerCouncil E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe:   SUBSCRIBE DesignerCouncil <your full name>
To unsubscribe:   SIGNOFF DesignerCouncil 
################################################################
Please visit IPC web site (http://jefry.ipc.org/forum.htm) for additional information.
For the technical support contact Dmitriy Sklyar at [log in to unmask] or 847-509-9700 ext.311
################################################################