Subject: | |
From: | |
Reply To: | TechNet E-Mail Forum. |
Date: | Thu, 7 May 1998 17:09:05 PDT |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Hello, I have a question concerning land dimensions
What is the recommended IPC land dimensions for a 0603 Surface Mount Chip
Inductor.
1.6mm x 0.8mm x 0.8mm - 0603 chip inductor dimensions
There is no reference to this device in IPC-SM-782 (includes Ammendment 1
October 1996).
Regards, Liam
################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe: SUBSCRIBE TechNet <your full name>
To unsubscribe: SIGNOFF TechNet
################################################################
Please visit IPC web site (http://jefry.ipc.org/forum.htm) for additional information.
For the technical support contact Dmitriy Sklyar at [log in to unmask] or 847-509-9700 ext.311
################################################################
Liam,
We use the following dimensions
pad length = 0.7
pad width = 0.8
distance between pads = 0.8
Dont know if this helps as it is not IPC. But we've used these dimensions for some time now with good results.
Regards
Ian Squires
Senior Production Engineer
-------------------------------------------------------
Graseby Dynamics Ltd
Park Avenue, Bushey, Watford, Herts, WD2 2BW
Web Site: www.gradyn.co.uk
Phone: 01923-228566 xt 295
Fax: 01923-221361
E-mail: [log in to unmask]
Registered in England no. 480992
Registered office:
765 Finchley Road, London, NW11 8DS
-------------------------------------------------------
################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe: SUBSCRIBE TechNet <your full name>
To unsubscribe: SIGNOFF TechNet
################################################################
Please visit IPC web site (http://jefry.ipc.org/forum.htm) for additional information.
For the technical support contact Dmitriy Sklyar at [log in to unmask] or 847-509-9700 ext.311
################################################################
|
|
|