Sender: |
|
X-To: |
|
Date: |
Fri, 8 May 1998 12:35:29 -0400 |
Reply-To: |
|
Subject: |
|
MIME-Version: |
1.0 |
Content-Transfer-Encoding: |
7bit |
Content-Type: |
text/plain; charset="iso-8859-1" |
From: |
|
Parts/Attachments: |
|
|
I've been using Cadence for 6 years for pcb design and would not recommend
it to anyone unless you have a staff to support you. On the schematic side,
library maintenance is terrible, and the interface to allegro is poor.
Allegro does the job, but not as friendly as many other packages. I'd give
Pads a strong serious look.
Tom
-----Original Message-----
From: Karl J. Bates <[log in to unmask]>
To: [log in to unmask] <[log in to unmask]>
Date: Thursday, May 07, 1998 9:51 AM
Subject: Re: [DC] what cad software is better.
>If I had a choice, I would choose Cadence. Unfortunately that
>wasn't on your list.... Then I would choose based on the type
>of PCB's you are designing. I am currently using Mentor Graphics
>and I have disliked it for 3 years now. Mentor would be my last
>choice. If you have to use a Mentor database look at
>http://www.intercept.com
>That is Pantheon.
>
>
>Karl
>
>################################################################
>DesignerCouncil E-Mail Forum provided as a free service by IPC using
LISTSERV 1.8c
>################################################################
>To subscribe/unsubscribe, send a message to [log in to unmask] with following
text in the body:
>To subscribe: SUBSCRIBE DesignerCouncil <your full name>
>To unsubscribe: SIGNOFF DesignerCouncil
>################################################################
>Please visit IPC web site (http://jefry.ipc.org/forum.htm) for additional
information.
>For the technical support contact Dmitriy Sklyar at [log in to unmask] or
847-509-9700 ext.311
>################################################################
>
################################################################
DesignerCouncil E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe: SUBSCRIBE DesignerCouncil <your full name>
To unsubscribe: SIGNOFF DesignerCouncil
################################################################
Please visit IPC web site (http://jefry.ipc.org/forum.htm) for additional information.
For the technical support contact Dmitriy Sklyar at [log in to unmask] or 847-509-9700 ext.311
################################################################
|
|
|