TECHNET Archives

April 1998

TechNet@IPC.ORG
Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
Push Pin Insertion -Reply
From:
SOKKHON OU <[log in to unmask]>
Reply To:
TechNet E-Mail Forum.
Date:
Mon, 6 Apr 1998 15:20:12 -0600
Content-Type:
text/plain
Parts/Attachments:
text/plain (23 lines) 
Normally, if  the pin is designed for press fit into circuit card, the pin
manufacturer shall have tool and process in place . If you build 5000
boards a month and use what you described, I do not know how do you
meet you delivery schedule.
Loose pin and tape in reel pin use different tool.
Give me a call at 512-218-7777, I press a lot of pins and connectors
every day.
Call the manufacturer is you best bet.

thanks

################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe:   SUBSCRIBE TechNet <your full name>
To unsubscribe:   SIGNOFF TechNet 
################################################################
Please visit IPC web site (http://jefry.ipc.org/forum.htm) for additional information.
For the technical support contact Dmitriy Sklyar at [log in to unmask] or 847-509-9700 ext.311
################################################################

ATOM RSS1 RSS2