Charles Barker@I-O INC
04/04/98 02:04 PM

Tim,

I believe some folks are inserting a moisture absorbing critter into the
bags before re-sealing.  One such system I have heard of (but have no
experience with) is called the RP System. You may want to touch base with
them.

The contact info I have is:
American-Pacific Associates, Inc.
304 Dunwoody Chace
Atalnta, GA 30328
770-804-0044
770-391-9593 FAX





Please respond to [log in to unmask]; Please respond to [log in to unmask]

To:   [log in to unmask]
cc:    (bcc: Charles Barker/US/I-O INC)
Subject:  [TN] Moisture Sensitive Parts




Hello All,
Does anyone know of some sort of vacuum sealer that our incoming
inspection/stock room personnel could use to reseal ESD safe bags with
moisture sensitive parts in them. We are running into a problem with
these bags being opened to verify counts or damage to parts (mostly from
consigned kits), and then they stay open for several days before we run
the job. I am especially concerned about BGA's. Any help would be
appreciated.
Tim Stammely
Process Engineer
MSI
Manassas, VA
################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following
text in the body:
To subscribe:   SUBSCRIBE TechNet <your full name>
To unsubscribe:   SIGNOFF TechNet
################################################################
Please visit IPC web site (http://jefry.ipc.org/forum.htm) for additional
information.
For the technical support contact Dmitriy Sklyar at [log in to unmask] or
847-509-9700 ext.311
################################################################

################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe:   SUBSCRIBE TechNet <your full name>
To unsubscribe:   SIGNOFF TechNet 
################################################################
Please visit IPC web site (http://jefry.ipc.org/forum.htm) for additional information.
For the technical support contact Dmitriy Sklyar at [log in to unmask] or 847-509-9700 ext.311
################################################################