TECHNET Archives

April 1998

TechNet@IPC.ORG
Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
Connector location
From:
Dennis Guy-Sell <[log in to unmask]>
Reply To:
TechNet E-Mail Forum.
Date:
Fri, 17 Apr 1998 16:10:03 -0600
Content-Type:
text/plain
Parts/Attachments:
text/plain (26 lines) 
Any guidance on the reasonableness and cost-efficient producibility of
the following callout for connector location on a PWB?

        <Connector pin contact pattern shall be symmetrical to the
center line of the PWB within .005">

Also, if the tolerance were relaxed to .010" would most cardrack designs
be able to compensate?

Thanks

Dennis Guy-Sell
[log in to unmask]

################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe:   SUBSCRIBE TechNet <your full name>
To unsubscribe:   SIGNOFF TechNet 
################################################################
Please visit IPC web site (http://jefry.ipc.org/forum.htm) for additional information.
For the technical support contact Dmitriy Sklyar at [log in to unmask] or 847-509-9700 ext.311
################################################################

ATOM RSS1 RSS2