TECHNET Archives

April 1998

TechNet@IPC.ORG
Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
Copper thickness measuring
From:
Tom Colton <[log in to unmask]>
Reply To:
TechNet E-Mail Forum.
Date:
Wed, 1 Apr 1998 15:57:20 -0500
Content-Type:
text/plain
Parts/Attachments:
text/plain (24 lines) 
TechNetters:

I am in need of a non-destructive method/device with which to measure
copper thickness in a finished hole from .010" to .080" diameter in
substrates from .020" to .060" thick.

Resolution should be .0001".  Any ideas?

Thanks, in advance for the guidance.

TC

################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe:   SUBSCRIBE TechNet <your full name>
To unsubscribe:   SIGNOFF TechNet 
################################################################
Please visit IPC web site (http://jefry.ipc.org/forum.htm) for additional information.
For the technical support contact Dmitriy Sklyar at [log in to unmask] or 847-509-9700 ext.311
################################################################

ATOM RSS1 RSS2