TECHNET Archives

April 1998

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
John Waite <[log in to unmask]>
Reply To:
John Waite <[log in to unmask]>
Date:
Tue, 7 Apr 1998 18:17:31 -0400
Content-Type:
text/plain
Parts/Attachments:
text/plain (72 lines)
-----Original Message-----
From: John Waite <[log in to unmask]>
To: Byrns Nancy <[log in to unmask]>
Date: Tuesday, April 07, 1998 6:14 PM
Subject: Re: [TN] IPC-A-600


>Hi Nancy,
>    IPC-A-600 is a commercial acceptability specification.  If you are
>dealing with Aerospace and Military applications, you cannot use this as a
>reference too.  You MUST obtain and utilize a PWB facility that is
certified
>and manufactures product in accordance with Mil-P-55110 ( I believe it is
>still used).  You can try calling DESC in Dayton Ohio, or talk to Jack at
>IPC for a number.  Whatever you do, do NOT reference the above document for
>Mil Spec level product.  If the product does not need to be certified to
Mil
>Spec, then you can simply state that "the product shall be manufactured in
>accordance with Mil-P-55110, but certification is not necessary".  This may
>ease the cost for any prototypes you are looking for.  If you Email me, I
>will give you my number and we can discuss further, or connect to the link
>below to my web page (will not be on the TechNet copy).   Good luck JOHN
>-----Original Message-----
>From: Byrns Nancy <[log in to unmask]>
>To: [log in to unmask] <[log in to unmask]>
>Date: Tuesday, April 07, 1998 3:38 PM
>Subject: [TN] IPC-A-600
>
>
>>I am a new learner in this IPC world and I have some concern.
>>
>>I need more information about IPC-A-600. Do we need to mention to the
>>manufacturer who fabricate the board to be conform to this standard? or
>>all manufacturer is conform to it? I would like to know if this standard
>>is for military rigid printed wiring board(class 3)? I would like to
>>know if IPC-A-600 is include in others IPC documents?
>>
>>Thanks you to help me in my job
>>Nancy Byrns
>>Electrical Engineer
>>Oerlikon Aerospace
>>
>>################################################################
>>TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
>>################################################################
>>To subscribe/unsubscribe, send a message to [log in to unmask] with
following
>text in the body:
>>To subscribe:   SUBSCRIBE TechNet <your full name>
>>To unsubscribe:   SIGNOFF TechNet
>>################################################################
>>Please visit IPC web site (http://jefry.ipc.org/forum.htm) for additional
>information.
>>For the technical support contact Dmitriy Sklyar at [log in to unmask] or
>847-509-9700 ext.311
>>################################################################
>>
>
>

################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe:   SUBSCRIBE TechNet <your full name>
To unsubscribe:   SIGNOFF TechNet 
################################################################
Please visit IPC web site (http://jefry.ipc.org/forum.htm) for additional information.
For the technical support contact Dmitriy Sklyar at [log in to unmask] or 847-509-9700 ext.311
################################################################


ATOM RSS1 RSS2