A good start would be to contact the laminate manufacturer(s) and
requesting a Material Safety Data Sheet - commonly referred to as a
MSDS sheet. This should give you information about the flammability
of the material and and hazardous by products resulting from a burn.
You may want to contact all potential material suppliers because the
resin systems of the material do vary somewhat by supplier.
> Date: Thu, 30 Apr 1998 09:15:48 -0400
> From: "Hurst, Joe" <[log in to unmask]>
> Subject: Fr4 material
> Dear fellow enthusiasts
>
> Where can I find info on the products of combustion (yes
> really)
> of FR4 material?
>
> (Not that I personally design boards that end up burning...)
>
> Thanx
>
> Joe Hurst
> Computng Devices Canada
> [log in to unmask]
>
Legal Notice:
All opinions are my own and do not necessarily reflect the opinion of the Management or Ownership of this station.
################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe: SUBSCRIBE TechNet <your full name>
To unsubscribe: SIGNOFF TechNet
################################################################
Please visit IPC web site (http://jefry.ipc.org/forum.htm) for additional information.
For the technical support contact Dmitriy Sklyar at [log in to unmask] or 847-509-9700 ext.311
################################################################