DESIGNERCOUNCIL Archives

April 1998

DesignerCouncil@IPC.ORG
Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
Harder Material
From:
"Wolfe, Robert" <[log in to unmask]>
Reply To:
DesignerCouncil E-Mail Forum.
Date:
Wed, 22 Apr 1998 12:38:10 -0400
Content-Type:
text/plain
Parts/Attachments:
text/plain (22 lines) 
The only other thing I can come up with???

If you still need to be using armor piercing rounds in an electronic
assy,
The only thing I could suggest is not part of the pcb fabrication
process but in the assembly process. Solder onto the contact pad a much
thicker square of a conductive metal chrome plated something, stainless,
etc.
Robert M. Wolfe

################################################################
DesignerCouncil E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe:   SUBSCRIBE DesignerCouncil <your full name>
To unsubscribe:   SIGNOFF DesignerCouncil
################################################################
Please visit IPC web site (http://jefry.ipc.org/forum.htm) for additional information.
For the technical support contact Dmitriy Sklyar at [log in to unmask] or 847-509-9700 ext.311
################################################################

ATOM RSS1 RSS2