Subject: | |
From: | |
Reply To: | DesignerCouncil E-Mail Forum. |
Date: | Thu, 16 Apr 1998 12:05:55 -0600 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
I have this new component and we are trying to create a pad shape for it
can anyone offer any suggestions. I have checked IPC-SM-782 and vendor spec
sheets to no avail for a pad shape.
This part is from Murata DRR-060-KE-550-T-C it has one pad with a width of
0,5 mm a length of 1,0 mm with no tolerance suggested and a second pad with
a width of 6,0 mm and a length of depending on frequency of part from 14,30
to 12,10. Our need is to have a single pad shape for this. Suggestions
range from placing a voided area in pad to create a suction effect to have
a laddered effect to the pad.
Any suggestions will be appreciated.
Steve Collins
Antec Corp.
################################################################
DesignerCouncil E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe: SUBSCRIBE DesignerCouncil <your full name>
To unsubscribe: SIGNOFF DesignerCouncil
################################################################
Please visit IPC web site (http://jefry.ipc.org/forum.htm) for additional information.
For the technical support contact Dmitriy Sklyar at [log in to unmask] or 847-509-9700 ext.311
################################################################
|
|
|