What are the specs and cost of the Epson 3000?

Scott

 -----Original Message-----
From: Doug Brooks [SMTP:[log in to unmask]]
Sent: Tuesday, April 14, 1998 12:05 PM
To: ScottS; DesignerCouncil
Subject: Re: [DC] ink jet plotters


For what it is worth, we bought an Epson 3000 for checkplotting
and love it. The plotter has (so far) been trouble free. The
only downside is that the media is expensive and so far we have
not found anything less than 4 mil film that is acceptable.

I'd love it if someone has found an ultra translucent vellum
that works well in an ink jet plotter

Doug Brooks





At 01:31 PM 4/14/98 -0400, you wrote:
>        My work group has recently purchased our first ink jet plotter,
and we're
>uncertain as to whether or not we like it yet.  It is used
intermittently,
>maybe that is why we have been having problems with the cartridges
>malfunctioning before they run out of ink.  Is there a popular brand and
>model used in the PCB layout industry that is proven to be reliable?
>_________________________________________________________________________

>HIGH, JAMES W.
                                     [log in to unmask]
>
>    Mail Stop 390                 Microelectronics & Tech Support
Section
>    1 East Durand Street                             Fabrication
Division
>    NASA Langley Research Center                  Building 1238, Room
155
>    Hampton, VA 23681-2199                          Phone
   757-864-5416
>                                                    FAX  757-864-8092
>
>################################################################
>DesignerCouncil E-Mail Forum provided as a free service by IPC using
LISTSERV 1.8c
>################################################################
>To subscribe/unsubscribe, send a message to [log in to unmask] with
following text in the body:
>To subscribe:   SUBSCRIBE DesignerCouncil <your full name>
>To unsubscribe:   SIGNOFF DesignerCouncil
>################################################################
>Please visit IPC web site (http://jefry.ipc.org/forum.htm) for
additional
information.
>For the technical support contact Dmitriy Sklyar at [log in to unmask] or
847-509-9700 ext.311
>################################################################
>
>
>
.
****************************************************
Doug Brooks, President              [log in to unmask]
UltraCAD Design, Inc.           http://www.ultracad.com

################################################################
DesignerCouncil E-Mail Forum provided as a free service by IPC using
LISTSERV
1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with
following
text in the body:
To subscribe:   SUBSCRIBE DesignerCouncil <your full name>
To unsubscribe:   SIGNOFF DesignerCouncil
################################################################
Please visit IPC web site (http://jefry.ipc.org/forum.htm) for additional
information.
For the technical support contact Dmitriy Sklyar at [log in to unmask] or
847-509-9700 ext.311
################################################################

################################################################
DesignerCouncil E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe:   SUBSCRIBE DesignerCouncil <your full name>
To unsubscribe:   SIGNOFF DesignerCouncil
################################################################
Please visit IPC web site (http://jefry.ipc.org/forum.htm) for additional information.
For the technical support contact Dmitriy Sklyar at [log in to unmask] or 847-509-9700 ext.311
################################################################