DESIGNERCOUNCIL Archives

April 1998

DesignerCouncil@IPC.ORG
Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
Re: Grounding PCB to Case
From:
John Laur <[log in to unmask]>
Reply To:
DesignerCouncil E-Mail Forum.
Date:
Wed, 1 Apr 1998 10:47:39 -0600
Content-Type:
text/plain
Parts/Attachments:
text/plain (22 lines) 
In addition to what doug brusig responded.  If you need a length of exposed
tin-lead (assuming hot air leveled boards) and the board will be wave
soldered, it may be wise to break the length up with soldermask in some
sort of a hatch pattern.  Solder will not build up in any one area.


John Laur
Rockwell Automation
Milwaukee, Wi

################################################################
DesignerCouncil E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe:   SUBSCRIBE DesignerCouncil <your full name>
To unsubscribe:   SIGNOFF DesignerCouncil
################################################################
Please visit IPC web site (http://jefry.ipc.org/forum.htm) for additional information.
For the technical support contact Dmitriy Sklyar at [log in to unmask] or 847-509-9700 ext.311
################################################################

ATOM RSS1 RSS2