Subject: | |
From: | |
Reply To: | DesignerCouncil E-Mail Forum. |
Date: | Thu, 23 Apr 1998 08:47:12 EDT |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Dear S.L.N.Murthy,
Thank you very much for the support I do greatly appreciate it. I know I
will be in contact with you again....and by the way call me Brian.
Thank you again, and will have many questions to come.
Actually here is one. :
I'm importing a design from an old version of MaxiPC (Cadstar's much eariler
version) and I have what cadstar is calling more than one board outline, this
is because I have a cut out in my PCB. I created the cutout first when I layed
the board out and Cadstar only acknowledges the first board outline that was
created. So it imports the design and keeps the cut out as the board outline
and turns what was the board outline into a "Figure" . I know...I dragging
this on, Sorry. Anyway do you know if there is an easy way to fix this small
problem....any imput would help
Thanks again,
Brian K. Doughty
################################################################
DesignerCouncil E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe: SUBSCRIBE DesignerCouncil <your full name>
To unsubscribe: SIGNOFF DesignerCouncil
################################################################
Please visit IPC web site (http://jefry.ipc.org/forum.htm) for additional information.
For the technical support contact Dmitriy Sklyar at [log in to unmask] or 847-509-9700 ext.311
################################################################
|
|
|