Subject: | |
From: | |
Reply To: | TechNet E-Mail Forum. |
Date: | Tue, 7 Apr 1998 08:28:45 +0000 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
John,
I've been looking into this to acquire a tool from fresh. We have etch tanks
on site but are looking for a tidier and more consistent method. I have come
across T-Tech, but have also found the LPKF Protomat tool. Our interest is
biased towards plated holes on metal backed substrates, T-Tech use a
conductive glue that you drill out and LPKF actually plate the holes. If
there are any other suppliers I would be interested too.
LPKF are a German firm
http://www.LPKFCADCAM.com
[log in to unmask]
Dave Coaker
Circuit Design Engineer
EEV Ltd - GEC Electro Optics
>Date: Sat, 4 Apr 1998 15:03:19 -0500
>From: "John L. Schmalzel" <[log in to unmask]>
>Subject: Rapid PCB Prototyping
>Sirs:
>I am interested in expanding/upgrading our rapid prototyping PCB
>facilities at our University. Currently, we have a T-Tech "Quick
>Circuit" CNC mill; however, we are interested in exploring other
>options. Can you point us in the right direction to find similar rapid
>prototyping technologies?
>Thanks!
>John L. Schmalzel
>Prof & Chair, E&CE
>Rowan University
>201 Mullica Hill Road
>Glassboro, NJ 08028
>609.256.4629
################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe: SUBSCRIBE TechNet <your full name>
To unsubscribe: SIGNOFF TechNet
################################################################
Please visit IPC web site (http://jefry.ipc.org/forum.htm) for additional information.
For the technical support contact Dmitriy Sklyar at [log in to unmask] or 847-509-9700 ext.311
################################################################
|
|
|