Subject: | |
From: | |
Reply To: | TechNet E-Mail Forum. |
Date: | Sat, 25 Apr 1998 18:59:39 EDT |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Hey there ya'll,
Jim Blankenhorn's SMT Plus also has the books mentioned by Phil, you can
check the titles that he carries at www.smtplus.com...
As a side-note and a question, I've been reading this discussion with a
lot of interest. Mainly because I know nothing about these types of assemblies
and solders...I've never had to build anything like it before.
So excuse me if this sounds like a dumb question (but I'm gonna ask
anyway...), why in the heck are the printed circuit assemblies used in
automobiles mounted on what's got to be the absolute WORST place to mount one;
a hot, vibrating engine? Only other places I can think of that might be worse
than that is someplace like the top of a piston or shoved up the tailpipe!
(...I better not speak too fast, maybe they are! GRIN)
Seems to me that the place to mount the electronics would be at the very
least up on the firewall in the engine compartment, or better yet, inside the
passenger compartment...there's gotta be some reason they don't, huh?...or
isn't there?
-Steve Gregory-
################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe: SUBSCRIBE TechNet <your full name>
To unsubscribe: SIGNOFF TechNet
################################################################
Please visit IPC web site (http://jefry.ipc.org/forum.htm) for additional information.
For the technical support contact Dmitriy Sklyar at [log in to unmask] or 847-509-9700 ext.311
################################################################
|
|
|