DESIGNERCOUNCIL Archives

April 1998

DesignerCouncil@IPC.ORG
Options: Use Monospaced Font
Show Text Part by Default
Condense Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Content-Transfer-Encoding:
7bit
Sender:
DesignerCouncil <[log in to unmask]>
Subject:
Grounding PCB to Case
From:
Joe Reichert <[log in to unmask]>
Date:
Wed, 1 Apr 1998 10:16:08 -0500
Content-Type:
text/plain; charset="us-ascii"
MIME-Version:
1.0
Reply-To:
"DesignerCouncil E-Mail Forum." <[log in to unmask]>, Joe Reichert <[log in to unmask]>
Parts/Attachments:
text/plain (24 lines) 
We currently have a PCB that will be put in an extrusion with front and
back panels that will be screwed on.  Would anyone have any information
on grounding criteria or techniques for attaching all three parts of the
case to earth ground on the PCB?  I have looked at UL508, but it seems a
little too wide open.  Any help would be appreciated!!

Thanks,

Joe Reichert
Lake Shore Cryotronics, Inc.
[log in to unmask]

################################################################
DesignerCouncil E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe:   SUBSCRIBE DesignerCouncil <your full name>
To unsubscribe:   SIGNOFF DesignerCouncil
################################################################
Please visit IPC web site (http://jefry.ipc.org/forum.htm) for additional information.
For the technical support contact Dmitriy Sklyar at [log in to unmask] or 847-509-9700 ext.311
################################################################

ATOM RSS1 RSS2