Once again I turn to you pleading for help.  The "powers that be" are
requiring us to use a 12 mil wide trace as a minimum unless we
absolutely cannot because of lack of space.  It seems our board
vendors have difficulty meeting a width and trace at 8/8.  My pleas
to look into other vendors fall upon deaf ears.  "They're too
expensive!", they cry.  So we pay the price over-designing our
boards.  Our boards are predominantly low current, low voltage.  8
mil usually is more than enough but......I'm sure you've all run into
this argument at one time or another.

What I'd like to hear from everyone are reasons why we *shouldn't*
use a wider trace than necessary - if there are any.  Other than it
takes longer to route a board with wider traces.  They don't care
about that.  What documentation can I offer to them to make our lives
just a tad bit easier?  Or am I lost in wishful thinking?

And also, today's dumb question:
I know that spacing between traces is governed by voltage and the
width is governed by current load and temperature rise above ambient.
 If I use a 12 mil wide trace, can I still maintain an 8 mil wide
space to the next trace?  Assume it meets the spacing for that
voltage.  Or is the spacing always at least track width?

I appreciate any and all responses on these issues.  :-)

Jo

JoAnn L. Amerson
Design Librarian
Red Lion Controls, Inc.
E-mail: [log in to unmask]
Voice: (717) 767-6961 ext 6308

################################################################
DesignerCouncil E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe:   SUBSCRIBE DesignerCouncil <your full name>
To unsubscribe:   SIGNOFF DesignerCouncil
################################################################
Please visit IPC web site (http://jefry.ipc.org/forum.htm) for additional information.
For the technical support contact Dmitriy Sklyar at [log in to unmask] or 847-509-9700 ext.311
################################################################