Sender: |
|
X-To: |
|
Date: |
Fri, 3 Apr 1998 15:59:32 -0600 |
Reply-To: |
|
Subject: |
|
MIME-Version: |
1.0 |
Content-Transfer-Encoding: |
7bit |
Content-Type: |
text/plain; charset=ISO-8859-1 |
From: |
|
Parts/Attachments: |
|
|
Clint,
Why not just provide the standard Excellon tool header? Most, if not all,
CAM systems can read the header directly so that the drill sizes are
automatically assigned. Your example may require the CAM operator to hand
enter the sizes for each T-code.
Dave Roesler
TRI-C Design, Inc.
----------
> From: Clint Cote <[log in to unmask]>
> To: [log in to unmask]
> Subject: [DC] Drill Header
> Date: Friday, April 03, 1998 3:20 PM
>
> Hey,
>
> I used to program drill machines but that was a long time ago. I am
trying to
> format my drill files to "satisfy everyone" here that needs info about
the
> drill. I'm wondering if the format that I've included below will cause
any
> problems for the CAM guys that really need it. If my memory serves me,
the M48
> means that what follows is the header up to the first % sign.
>
> M48
> TOOL SIZE QTY PLATING
> ================================================
> T1 size: 0.009000 qty:2630 yes
> T2 size: 0.019000 qty:72 yes
> T3 size: 0.028000 qty:18 yes
> T4 size: 0.031000 qty:120 yes
> T5 size: 0.038000 qty:56 yes
> T6 size: 0.044000 qty:756 yes
> T7 size: 0.052000 qty:24 no
> T8 size: 0.082000 qty:24 no
> T9 size: 0.094000 qty:4 no
> T10 size: 0.125000 qty:8 no
> %
> G90
> M72
> T1
> X02265Y0193
> X02385Y02049
> X02439Y02041
> Y01958
>
> This isn't the traditional format, will it work or will it have to be
stripped
> out prior to processing?
>
> =============================================================
> Clint Cote GE Fanuc Automation
> PCB Designer PO Box 8106, Mail stop D-40
> Phone: (804) 978-5946 Charlottesville, VA 22906
> e-mail: [log in to unmask]
>
> ################################################################
> DesignerCouncil E-Mail Forum provided as a free service by IPC using
LISTSERV 1.8c
> ################################################################
> To subscribe/unsubscribe, send a message to [log in to unmask] with
following text in the body:
> To subscribe: SUBSCRIBE DesignerCouncil <your full name>
> To unsubscribe: SIGNOFF DesignerCouncil
> ################################################################
> Please visit IPC web site (http://jefry.ipc.org/forum.htm) for additional
information.
> For the technical support contact Dmitriy Sklyar at [log in to unmask] or
847-509-9700 ext.311
> ################################################################
>
################################################################
DesignerCouncil E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe: SUBSCRIBE DesignerCouncil <your full name>
To unsubscribe: SIGNOFF DesignerCouncil
################################################################
Please visit IPC web site (http://jefry.ipc.org/forum.htm) for additional information.
For the technical support contact Dmitriy Sklyar at [log in to unmask] or 847-509-9700 ext.311
################################################################
|
|
|