DESIGNERCOUNCIL Archives

April 1998

DesignerCouncil@IPC.ORG
Options: Use Monospaced Font
Show Text Part by Default
Condense Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Mime-Version:
1.0
Sender:
DesignerCouncil <[log in to unmask]>
Subject:
Drill Header
From:
Clint Cote <[log in to unmask]>
Date:
Fri, 3 Apr 1998 16:20:35 -0500
Content-Transfer-Encoding:
7bit
Content-Type:
text/plain; charset=us-ascii
Reply-To:
"DesignerCouncil E-Mail Forum." <[log in to unmask]>, Clint Cote <[log in to unmask]>
Parts/Attachments:
text/plain (51 lines) 
Hey,

I used to program drill machines but that was a long time ago.  I am trying to
format my drill files to "satisfy everyone" here that needs info about the
drill.  I'm wondering if the format that I've included below will cause any
problems for the CAM guys that really need it.  If my memory serves me, the M48
means that what follows is the header up to the first % sign.

M48
TOOL    SIZE              QTY           PLATING
================================================
T1      size: 0.009000    qty:2630      yes
T2      size: 0.019000    qty:72        yes
T3      size: 0.028000    qty:18        yes
T4      size: 0.031000    qty:120       yes
T5      size: 0.038000    qty:56        yes
T6      size: 0.044000    qty:756       yes
T7      size: 0.052000    qty:24        no
T8      size: 0.082000    qty:24        no
T9      size: 0.094000    qty:4         no
T10      size: 0.125000    qty:8        no
%
G90
M72
T1
X02265Y0193
X02385Y02049
X02439Y02041
Y01958

This isn't the traditional format, will it work or will it have to be stripped
out prior to processing?

=============================================================
Clint Cote                      GE Fanuc Automation
PCB Designer                    PO Box 8106, Mail stop D-40
Phone:  (804) 978-5946          Charlottesville, VA 22906
e-mail: [log in to unmask]

################################################################
DesignerCouncil E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe:   SUBSCRIBE DesignerCouncil <your full name>
To unsubscribe:   SIGNOFF DesignerCouncil
################################################################
Please visit IPC web site (http://jefry.ipc.org/forum.htm) for additional information.
For the technical support contact Dmitriy Sklyar at [log in to unmask] or 847-509-9700 ext.311
################################################################

ATOM RSS1 RSS2