Hello all,
after following the thread on another day I looked at the
results of the PCB bench mark and did not see much usefull information
about
any of the Cad Systems.
According to the chart on Task/Grading there is not that much difference
in what each system can do.
I did not see any information on how many layers were on the finished
board,
how long did the routing take to what percentage of finish.
What is the price of the system?
The Board/Performance Data is evaluation of manufacturability, but what
it means
Signal layer poor or excellent?
Sometimes it seems that you get so much information and yet
not much sense in all of it.
Hope your day is better than
my
Mirka
--
Mirka Halas <[log in to unmask]>
################################################################
DesignerCouncil E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe: SUBSCRIBE DesignerCouncil <your full name>
To unsubscribe: SIGNOFF DesignerCouncil
################################################################
Please visit IPC web site (http://jefry.ipc.org/forum.htm) for additional information.
For the technical support contact Dmitriy Sklyar at [log in to unmask] or 847-509-9700 ext.311
################################################################