I have a little problem, perhaps someone could help to steer me in the right
direction.  I have a bunch of old designs (Gerber and Excellon Drill files) that
I need to create a drill drawing for.  I need to show the quantity, size,
plating requirements and a unique symbol or letter for each occurrence (a
typical drill drawing without the dimension).  The only files I have to create
this from is the Excellon drill file.  I have looked at CAM350 and I can reverse
engineer a drill drawing with that but it takes about 5-10 minutes and I would
need to train others how to do it.  Besides the fact that buying CAM350 to
create drill drawings is like buying a tractor to make a flower garden.  Is
there software that can do this and only this?

Thanks for any help!

=============================================================
Clint Cote                      GE Fanuc Automation
PCB Designer                    PO Box 8106, Mail stop D-40
Phone:  (804) 978-5946          Charlottesville, VA 22906
e-mail: [log in to unmask]

################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe:   SUBSCRIBE TechNet <your full name>
To unsubscribe:   SIGNOFF TechNet 
################################################################
Please visit IPC web site (http://jefry.ipc.org/forum.htm) for additional information.
For the technical support contact Dmitriy Sklyar at [log in to unmask] or 847-509-9700 ext.311
################################################################