Robert

You are correct I would like to have holes drilled in the glass.
You said that you know were I could go to have this done.
If you can let me know were I can go, I would appreciate it if
you would either E MAIL me or you can contact me off line at
this number 410-879-6553 ,just ask for me. >


Thank you in advance
David Blevins


>David,
>
>I'm not sure when you say "add tooling" whether you want to drill holes in
>the existing piece of glass or you want to modify the image with additional
>features.
>
>There are at least a few trade shops in the U.S. that have the capability
>to drill accurate holes in glass phototools, though I'd need to look up
>some names and phone numbers.  Let me know if that's what you need.
>
>If you need to add additional image features, the process involves making a
>reproduction of your glass artwork onto film.  Then either physically
>adding the features through cut and paste and then making another master on
>film.  Or, you can scan your original image into a CAD system, add the
>appropriate features, and plot a new master.  The final could end up on
>either film or glass, but given the number of reproduction steps required I
>don't see much point to going back to glass.  Again, there are several
>trade shops that can handle the work for you.
>
>Bob Seyfert
>DuPont Electronics
>
>################################################################
>TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
>################################################################
>To subscribe/unsubscribe, send a message to [log in to unmask] with
following text in the body:
>To subscribe:   SUBSCRIBE TechNet <your full name>
>To unsubscribe:   SIGNOFF TechNet
>################################################################
>Please visit IPC web site (http://jefry.ipc.org/forum.htm) for additional
information.
>For the technical support contact Dmitriy Sklyar at [log in to unmask] or
847-509-9700 ext.311
>################################################################
>
>
>
Modular Components National, Inc.
2302 Industry Court
Forest Hill, MD 2150
PH (410) 879-6553
Fax (410) 838-7629

################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe:   SUBSCRIBE TechNet <your full name>
To unsubscribe:   SIGNOFF TechNet 
################################################################
Please visit IPC web site (http://jefry.ipc.org/forum.htm) for additional information.
For the technical support contact Dmitriy Sklyar at [log in to unmask] or 847-509-9700 ext.311
################################################################