Hi,
Yes, it refers to the length of the PTH leads protruding from the barrel on
the solder side of the PCB,(PWB on the other side of the water).
Regards


At 09:01 26/03/98 -0400, you wrote:
>Good day TechNet!
>A question arises from a note on an assembly drawing.  Let me first say
>that the drawing originates on the other side of the pond (England), and
>concerns the assembly of a board consisting of a couple of connectors
>and resistors.  In the notes appears the following:
>"maximum solder spill height to be 2.54 (0.10ins)"
>Now, by my use of that kind of phrase - any solder spill is bad, so this
>is quite confusing.  Can any technetter's to the east of me shed some
>light on this?
>
>Thanks!
>
>Graham Collins
>Process Engineer
>Litton Systems Canada
>(902) 873-2000 extension 215
>
>
>Attachment Converted: c:\eudora\attach\TNclarif
>

################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe:   SUBSCRIBE TechNet <your full name>
To unsubscribe:   SIGNOFF TechNet 
################################################################
Please visit IPC web site (http://jefry.ipc.org/forum.htm) for additional information.
For the technical support contact Dmitriy Sklyar at [log in to unmask] or 847-509-9700 ext.311
################################################################