Ed,

     At a past employer, we built boards for a pretty large networking company
that went into one of their servers. Because of mistake in one of the Gerber
files for a assembly, we had to do a trace cut and install a jumper wire as
part of the normal production process, which to me, would be the same as a
trace repair.

     From what I know, everything was fine with the boards...they ran just
like they were supposed to and never had any problems. I know this is not
scientific data, but just something that may show that if the repair is done
correctly there shouldn't be a problem whatsoever...

                                                            -Steve Gregory-

################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe:   SUBSCRIBE TechNet <your full name>
To unsubscribe:   SIGNOFF TechNet 
################################################################
Please visit IPC web site (http://jefry.ipc.org/forum.htm) for additional information.
For the technical support contact Dmitriy Sklyar at [log in to unmask] or 847-509-9700 ext.311
################################################################