It is sometimes hard to get designers to do what you want.  You might want
to try GC-CAM from GraphiCode http://www.graphicode.com. It has one of the
better Gerber readers.  Or you can get the GerbIn Gerber translator tool
from Unicam http://www.unicam.com.

Randy Anderson
ExtraTime LLC
425-260-69
[log in to unmask]
http://www.extratime.com



>Dhawan, Ashok wrote:
>>
>> Many a time we find designer sending us gerber cad files (for layers
>> only alongwith aperture list )-do software packages exist for generating
>> neutral files ,geometric files and wire netlist files .
>>
>> I need neutral files for running on Unicam software.
>>
>        Sounds like you need to communicate with the designer,
>        or perhaps your sales folks need to get the Unicam message
>        to your customers.
>
>        Supplying Unicam data is not hard, if the designer knows
>        that you need it.
>--
>
>      Jeff Seeger                             Applied CAD Knowledge Inc
>      Chief Technical Officer                      Tyngsboro, MA  01879
>      jseeger "at" appliedcad "dot" com                    978 649 9800

################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe:   SUBSCRIBE TechNet <your full name>
To unsubscribe:   SIGNOFF TechNet 
################################################################
Please visit IPC web site (http://jefry.ipc.org/forum.htm) for additional information.
For the technical support contact Dmitriy Sklyar at [log in to unmask] or 847-509-9700 ext.311
################################################################