Thanks!!!
> ----------
> From: Poulin, Michel[SMTP:[log in to unmask]]
> Sent: Friday, March 13, 1998 3:02 PM
> To: [log in to unmask]
> Subject: Re: [TN] OSP COATED BOARDS
>
> Kathy,
>
> Try the following persons at Enthone OMI (West Heaven CT).
> They have the answers your're looking at...
>
> Bob Farrell
> Eric Strafstrom
> Durand Cerone
>
> Good luck.
>
>
>
> Michel Poulin
> Technical advisor / Conseiller Technique
> V I A S Y S T E M S CANADA.
> 379 Brignon Granby, Quebec (Canada) J2G 8N5
> Tel.: ( 514 ) 378-0193, FAX: ( 514 ) 378-5110
> E-MAIL: [log in to unmask]
>
> > ----------
> > From: Kathy Palumbo[SMTP:[log in to unmask]]
> > Reply To: TechNet E-Mail Forum.;Kathy Palumbo
> > Sent: Friday, March 13, 1998 5:00 PM
> > To: [log in to unmask]
> > Subject: [TN] OSP COATED BOARDS
> >
> > We are in the process of performing an analysis on OSP coated boards
> > as
> > an alternative to HASL coated boards. So far everything looks
> > excellent. Outstanding wetting, solderability, less solder bridging
> > issues, better paste printing results, better component placement
> > results, better match of pad geometry with gerber data, no bow and
> > twist
> > problems, flatter board surface, etc., etc.....
> >
> > However our Manufacturing manager is concerned with the following
> > issues:
> >
> > 1. Moisture Sensitivity
> > 2. Scratches through the OSP coating
> > 3. Finger print sensitivity
> > 4. Stricter Handling requirements
> >
> > Will the boards have to be vacuumed sealed with desiccant to prevent
> > moisture damage? How sensitive are the boards to finger prints?
> What
> > is the typical shelf life of an OSP coated board? If the boards are
> > scratched through the OSP coating will we have soldering problems
> > later?
> >
> >
> > Is there a contact person at Enthone (our supplier used ENTEK OSP
> > coating) who could help me with some of this?
> >
> > These are just a few questions that need to be addressed, and any
> > response regarding this matter will be greatly appreciated.
> >
> >
> > Thanks in advance for your help!
> >
> > Kathy Palumbo
> >
> > ################################################################
> > TechNet E-Mail Forum provided as a free service by IPC using
> LISTSERV
> > 1.8c
> > ################################################################
> > To subscribe/unsubscribe, send a message to [log in to unmask] with
> > following text in the body:
> > To subscribe: SUBSCRIBE TechNet <your full name>
> > To unsubscribe: SIGNOFF TechNet
> > ################################################################
> > Please visit IPC web site (http://jefry.ipc.org/forum.htm) for
> > additional information.
> > For the technical support contact Dmitriy Sklyar at [log in to unmask]
> or
> > 847-509-9700 ext.311
> > ################################################################
> >
>
> ################################################################
> TechNet E-Mail Forum provided as a free service by IPC using LISTSERV
> 1.8c
> ################################################################
> To subscribe/unsubscribe, send a message to [log in to unmask] with
> following text in the body:
> To subscribe: SUBSCRIBE TechNet <your full name>
> To unsubscribe: SIGNOFF TechNet
> ################################################################
> Please visit IPC web site (http://jefry.ipc.org/forum.htm) for
> additional information.
> For the technical support contact Dmitriy Sklyar at [log in to unmask] or
> 847-509-9700 ext.311
> ################################################################
>
################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe: SUBSCRIBE TechNet <your full name>
To unsubscribe: SIGNOFF TechNet
################################################################
Please visit IPC web site (http://jefry.ipc.org/forum.htm) for additional information.
For the technical support contact Dmitriy Sklyar at [log in to unmask] or 847-509-9700 ext.311
################################################################
|
