Dear Sirs:
With reference to IPC-A-610, rev B, components that dissipate 1 watt or
greater must be mounted 1.5 mm above the board surface. (section 3.2.1,
page 31) Why does IPC-CM-770 rev D state these components must be
mounted only .5 mm from the board surface? (section 5.2.4.2, page 2-3.)
Why the conflict in Standards?
################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe: SUBSCRIBE TechNet <your full name>
To unsubscribe: SIGNOFF TechNet
################################################################
Please visit IPC web site (http://jefry.ipc.org/forum.htm) for additional information.
For the technical support contact Dmitriy Sklyar at [log in to unmask] or 847-509-9700 ext.311
################################################################