Subject: | |
From: | |
Reply To: | TechNet E-Mail Forum. |
Date: | Tue, 24 Mar 1998 22:30:31 -0800 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
It is sometimes hard to get designers to do what you want. You might want
to try GC-CAM from GraphiCode http://www.graphicode.com. It has one of the
better Gerber readers. Or you can get the GerbIn Gerber translator tool
from Unicam http://www.unicam.com.
Randy Anderson
ExtraTime LLC
425-260-69
[log in to unmask]
http://www.extratime.com
>Dhawan, Ashok wrote:
>>
>> Many a time we find designer sending us gerber cad files (for layers
>> only alongwith aperture list )-do software packages exist for generating
>> neutral files ,geometric files and wire netlist files .
>>
>> I need neutral files for running on Unicam software.
>>
> Sounds like you need to communicate with the designer,
> or perhaps your sales folks need to get the Unicam message
> to your customers.
>
> Supplying Unicam data is not hard, if the designer knows
> that you need it.
>--
>
> Jeff Seeger Applied CAD Knowledge Inc
> Chief Technical Officer Tyngsboro, MA 01879
> jseeger "at" appliedcad "dot" com 978 649 9800
################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe: SUBSCRIBE TechNet <your full name>
To unsubscribe: SIGNOFF TechNet
################################################################
Please visit IPC web site (http://jefry.ipc.org/forum.htm) for additional information.
For the technical support contact Dmitriy Sklyar at [log in to unmask] or 847-509-9700 ext.311
################################################################
|
|
|