Subject: | |
From: | |
Reply To: | |
Date: | Tue, 24 Mar 1998 19:54:12 +0100 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Hi Gareth,
we have such a system for evaluation project. But actually no results because it is just
installed.
We know that the bump height must have a very small tolerance window and the interface of
polyimide to copper needs a absorption dark layer to have a hight laser enegry absorption.
This system is patented by PacTec and I do not know other system suppliers.
Regards
Achim
Hello Everyone,
> I've recently read an article by PAC TECH on Laser solder ball
> bumping of chips and substrates. This article provides information on the
> basics of the process and the advantages of using this system.
> However this article does not give draw backs to the technology and
> also does not fully explain away some of the technical difficulties
> one might expect from using such a technology.
>
> Such as the advantage of finer pitch if you bump the chip, and yet the substrate still
> requires a solder paste deposit, therefore losing the
> advantage unless you bump both
>
> Does anybody know of other companies which boast laser solder ball
> technologies or have experience with this.
>
> Thanks very much
>
> Gareth
>
> ################################################################
> TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
> ################################################################
> To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
> To subscribe: SUBSCRIBE TechNet <your full name>
> To unsubscribe: SIGNOFF TechNet
> ################################################################
> Please visit IPC web site (http://jefry.ipc.org/forum.htm) for additional information.
> For the technical support contact Dmitriy Sklyar at [log in to unmask] or 847-509-9700 ext.311
> ################################################################
################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe: SUBSCRIBE TechNet <your full name>
To unsubscribe: SIGNOFF TechNet
################################################################
Please visit IPC web site (http://jefry.ipc.org/forum.htm) for additional information.
For the technical support contact Dmitriy Sklyar at [log in to unmask] or 847-509-9700 ext.311
################################################################
|
|
|