Hope you received my last e-mail. If there is anything that we at ETS can do
please let me know.

Sincerely,

Brian Stumm
ETS, LLC



>We are looking to purchase a used, operational forced
>air convection oven.  The oven is to used in an application
>which has a larger process window than a SMT
>placement/reflow process.  Below is the general minimum
>requirements for the oven:
>
>- mesh conveyor, (edge conveyors not required)
>- 4 zones, 2 preheat, 1 reflow, 1 cooling
>- no need for computer control (rheostat controlled zone
>temperatures, fan speeds and conveyor speeds are fine)
>- minimum 3" height clearance along entire length
>
>Therefore, what I am really looking for is someone who has
>a older convection oven, that has since been replaced with
>one with edge conveyors, that was purchased before edge
>conveyors were a necessity that has been sitting in
>someone's warehouse for eons and you cannot think of a thing
>to do with it.
>
>P.S.
>Has anyone had any experience on using pass-thru convection
>ovens for shrinking heat-shrink tubing over cable
>assemblies.
>
>Any help will be most appreciated.
>
>Thanks,.......Brian Husnik
>----------------------
>Brian Husnik
>Production Manager
>SED Systems Inc.
>Saskatoon, Saskatchewan,
>Canada, S7K 3P7
>Phone: (306) 933-1608
>E-mail:  [log in to unmask]
>
>################################################################
>TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
>################################################################
>To subscribe/unsubscribe, send a message to [log in to unmask] with following
text in the body:
>To subscribe:   SUBSCRIBE TechNet <your full name>
>To unsubscribe:   SIGNOFF TechNet
>################################################################
>Please visit IPC web site (http://jefry.ipc.org/forum.htm) for additional
information.
>For the technical support contact Dmitriy Sklyar at [log in to unmask] or
847-509-9700 ext.311
>################################################################
>
>
>

################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe:   SUBSCRIBE TechNet <your full name>
To unsubscribe:   SIGNOFF TechNet 
################################################################
Please visit IPC web site (http://jefry.ipc.org/forum.htm) for additional information.
For the technical support contact Dmitriy Sklyar at [log in to unmask] or 847-509-9700 ext.311
################################################################