We are using wire solder which contains flux designated as WSF-0 . This
flux has no polyglycols and is halide free. Following the solder touch -
up of PCB assemblies they are in-line with rinse aid solution and are final
rinsed with DI water. The technical bulletin of the solder manufacturer
specifies SIR to be 1.2E + 09 OHMS.
Are we required to submit test boards for SIR qualification tests?
This is only a hand soldering operation and not wave soldering process .
Terry Huddleston
Product Assurance Manager
Teledyne Lewisburg
Phone: (931) 359-4531
FAX: (931) 359-4978
################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe: SUBSCRIBE TechNet <your full name>
To unsubscribe: SIGNOFF TechNet
################################################################
Please visit IPC web site (http://jefry.ipc.org/forum.htm) for additional information.
For the technical support contact Dmitriy Sklyar at [log in to unmask] or 847-509-9700 ext.311
################################################################