TECHNET Archives

February 1998

TechNet@IPC.ORG
Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
Re: PCB cut-out
From:
"John Haman Jr." <[log in to unmask]>
Reply To:
TechNet E-Mail Forum.
Date:
Mon, 23 Feb 1998 08:32:36 PST
Content-Type:
text/plain
Parts/Attachments:
text/plain (58 lines) 
Alaberge,

Standard policy on break away tabs I've used in the
past was no thinner than the thickness of the material.
Keep in mind the weight of the finished assembly.  If
you are not satisfied with the breakaway tabs then maybe
you might want to try scoring the boards.

John Haman Jr.


----------
> Hi everyone !
>
>
> Our PCboards are 0.062" thick.  Actually, our cut-out for break-away tabs
> are 0.093" and we would like to lower it to 0.062"or even 0.031" (to help
> sensors to see the board)
>
> Is there a specific minimum. standard in the industry  to avoid price
> increase and also to stay in Fab standard tools ??
>
> Thanks in advance for any input !
>
>
> ALaberge
> Matrox electronic Systems
> Quality Eng.
>
> ################################################################
> TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
> ################################################################
> To subscribe/unsubscribe, send a message to [log in to unmask] with
following
> text in the body:
> To subscribe:   SUBSCRIBE TechNet <your full name>
> To unsubscribe:   SIGNOFF TechNet
> ################################################################
> Please visit IPC web site (http://jefry.ipc.org/forum.htm) for additional
> information.
> For the technical support contact Dmitriy Sklyar at [log in to unmask] or
> 847-509-9700 ext.311
> ################################################################
>
>

################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe:   SUBSCRIBE TechNet <your full name>
To unsubscribe:   SIGNOFF TechNet 
################################################################
Please visit IPC web site (http://jefry.ipc.org/forum.htm) for additional information.
For the technical support contact Dmitriy Sklyar at [log in to unmask] or 847-509-9700 ext.311
################################################################

ATOM RSS1 RSS2