Subject: | |
From: | |
Reply To: | TechNet E-Mail Forum. |
Date: | Wed, 18 Feb 1998 16:00:07 -0700 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Jim,
I am used to the .01"/inch myself in the TH world. We are just beginning
to get into the SM world and I thought I had seen a much tighter
tolerance when one is talking about SM. I have ordered the IPC specs,
but they have not arrived yet. Can you confirm to me that the .01"/inch
is valid in SM also?
Thank you sir.
Richard Hamilton
Clemar Mfg. / Rain Bird
[log in to unmask]
> -----Original Message-----
> From: Jim Mathis [SMTP:[log in to unmask]]
> Sent: Wednesday, February 18, 1998 2:27 PM
> To: [log in to unmask]
> Subject: Re: [TN] PCB warpage
>
> I spec'd out .01"/inch, also, which used to be the spec. IPC-275
> section
> 5.2.5.2 now specs Bow & Twist in terms of percentages. If you don't
> have a
> copy of IPC-275, let me know and I'll fax you the appropriate pages.
>
################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe: SUBSCRIBE TechNet <your full name>
To unsubscribe: SIGNOFF TechNet
################################################################
Please visit IPC web site (http://jefry.ipc.org/forum.htm) for additional information.
For the technical support contact Dmitriy Sklyar at [log in to unmask] or 847-509-9700 ext.311
################################################################
|
|
|