I have used a Nordson oven (ETS reflow oven) on 1753 (a thicker version of
1765) successfully at a previous employer. Cure time was a minimum of 1
minute (sometimes less) for 2 mil coating. This worked as long as relative
humidity in the plant was over 25%. There was app. 30 seconds between end
of spray and oven entrance sitting on a conveyor.
-------------
Original Text
From: C=US/A=INTERNET/DDA=ID/TechNet(a)IPC.ORG, on 2/17/98 9:31 AM:
See attached files.
################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe: SUBSCRIBE TechNet <your full name>
To unsubscribe: SIGNOFF TechNet
################################################################
Please visit IPC web site (http://jefry.ipc.org/forum.htm) for additional information.
For the technical support contact Dmitriy Sklyar at [log in to unmask] or 847-509-9700 ext.311
################################################################