Subject: | |
From: | |
Reply To: | TechNet E-Mail Forum. |
Date: | Wed, 11 Feb 1998 13:33:54 -0500 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
You could also wave solder with selective pallets.
Bev Christian
Nortel
>----------
>From: Phil Bavaro[SMTP:[log in to unmask]]
>Sent: Wednesday, February 11, 1998 12:02 PM
>To: [log in to unmask]
>Subject: [TN] Assy: (BGAs + FPGA)/(BGAs)
>
>We have a design which is coming up that will have PBGAs (1.27 pitch) on
>both sides, and unfortunately also one fine pitch PGA on the same board.
>
>Our plan is to selectively solder the PGAs in the immediate future. Long
>term I would like to use intrusive reflow (pin in paste, paste in hole,
>etc) to solder the PGAs.
>
>
>Has anyone done this already who is willing to share their experience?
>
>And if so, how do you guarantee that the placement operation (for us it
>will be manual) doesn't disturb the paste?
>
>One idea I thought of was to use guide pins to locate one of the PGA
>insertion/extraction tools to insert it with. Any thoughts are welcome.
>
>
>Phillip A. Bavaro
>Senior Manufacturing Engineer
>[log in to unmask]
>Tel (619) 658-2542
>Fax (619) 658-1584
>
>################################################################
>TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
>################################################################
>To subscribe/unsubscribe, send a message to [log in to unmask] with following
>text in the body:
>To subscribe: SUBSCRIBE TechNet <your full name>
>To unsubscribe: SIGNOFF TechNet
>################################################################
>Please visit IPC web site (http://jefry.ipc.org/forum.htm) for additional
>information.
>For the technical support contact Dmitriy Sklyar at [log in to unmask] or
>847-509-9700 ext.311
>################################################################
>
>
################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe: SUBSCRIBE TechNet <your full name>
To unsubscribe: SIGNOFF TechNet
################################################################
Please visit IPC web site (http://jefry.ipc.org/forum.htm) for additional information.
For the technical support contact Dmitriy Sklyar at [log in to unmask] or 847-509-9700 ext.311
################################################################
|
|
|