Since I'm not getting much response from Technet on this one I'll post it
here and see what happens.
----------
> From: Steve Collins <[log in to unmask]>
> To: TechNet <[log in to unmask]>
> Cc: [log in to unmask]
> Subject: Barrel Cracking
> Date: Wednesday, February 25, 1998 8:37 AM
>
> Is the temperature called out in IPC-TM-650 2.6.8 specific to FR-4?
>
> Is this test valid for Composite material such as MC-3D material from
> Glassteel Industrial Laminates?
>
> What is the reason for specifying 550°C temperature?
>
> What kind of acceleration factors or failure rates can been expected from
> this test?
>
> If test is run at 475°C to 500°C and boards pass test what kind of life
> expectancy can be expected Vs testing at 550°C?
>
> Is this test designed to be a destructive test for composite materials?
>
> Steve Collins
>
>
>
>
################################################################
DesignerCouncil E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe: SUBSCRIBE DesignerCouncil <your full name>
To unsubscribe: SIGNOFF DesignerCouncil
################################################################
Please visit IPC web site (http://jefry.ipc.org/forum.htm) for additional information.
For the technical support contact Dmitriy Sklyar at [log in to unmask] or 847-509-9700 ext.311
################################################################