Thought I might forward this to the designers community in hopes
of any help for Eric.
>>> Eric Blazi <[log in to unmask]> 02/04/98 05:11am >>>
We have acquired an artwork scanner from a board shop that has ceased
operations. The manufacturer is Applied Logic and the model is ICON HR. The
previous owner used a software called Cadrill. We would like to use this
scanner to convert mylars to Gerber but cannot find enough information on the
scanner to get it operating. I cannot locate the manufacturer and we can't
find any scanning software resident on the device. Can anyone help???
Eric Blazi
################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe: SUBSCRIBE TechNet <your full name>
To unsubscribe: SIGNOFF TechNet
################################################################
Please visit IPC web site (http://jefry.ipc.org/forum.htm) for additional information.
For the technical support contact Dmitriy Sklyar at [log in to unmask] or 847-509-9700 ext.311
################################################################
################################################################
DesignerCouncil E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe: SUBSCRIBE DesignerCouncil <your full name>
To unsubscribe: SIGNOFF DesignerCouncil
################################################################
Please visit IPC web site (http://jefry.ipc.org/forum.htm) for additional information.
For the technical support contact Dmitriy Sklyar at [log in to unmask] or 847-509-9700 ext.311
################################################################