Mime-Version: |
1.0 |
Sender: |
|
X-To: |
|
Date: |
Mon, 16 Feb 1998 12:32:10 -0600 |
Reply-To: |
|
Subject: |
|
From: |
|
In-Reply-To: |
|
Content-Type: |
text/plain; charset="us-ascii" |
Parts/Attachments: |
|
|
Jeffery,
We routinely design boards for 155 to 200 C.
We use polyimide base materials. We also use a
gold flash (not plate) over nickel for flatness
so we can use fine pitch (.5mm & .025") parts.
Our min. trace/space is usually .008. No ceramic
parts allowed.
Hope this helps some,
Rick
At 01:25 PM 2/16/98 -0500, you wrote:
>To All -
>
>I am currently working on the design of a PWB that must continuously
>function (read as IPC-D-275 class 3) at ambient temperatures as high as
>105 degrees C. I am seeking input as to design criteria for this
>environment.
>
>The items I have already identified include:
>
>200 degree C Tg FR-4/Gtek base material
>Conformal leaded parts where ever available
>No fine line / fine pitch design
>Teardrop at all drilled pads including vias
>
>My primary question is should we be using a "NO LEAD" finish and solder
>for these boards?
>Is there any thing I have overlooked?
>
>TIA
>Jeffrey McGlaughlin
>[log in to unmask]
>Battelle Memorial Institute
>Columbus Ohio
>
>################################################################
>DesignerCouncil E-Mail Forum provided as a free service by IPC using
LISTSERV 1.8c
>################################################################
>To subscribe/unsubscribe, send a message to [log in to unmask] with
following text in the body:
>To subscribe: SUBSCRIBE DesignerCouncil <your full name>
>To unsubscribe: SIGNOFF DesignerCouncil
>################################################################
>Please visit IPC web site (http://jefry.ipc.org/forum.htm) for additional
information.
>For the technical support contact Dmitriy Sklyar at [log in to unmask] or
847-509-9700 ext.311
>################################################################
>
>
Rick Wilson
Senior Designer
HES Houston, TX
################################################################
DesignerCouncil E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe: SUBSCRIBE DesignerCouncil <your full name>
To unsubscribe: SIGNOFF DesignerCouncil
################################################################
Please visit IPC web site (http://jefry.ipc.org/forum.htm) for additional information.
For the technical support contact Dmitriy Sklyar at [log in to unmask] or 847-509-9700 ext.311
################################################################
|
|
|