Sender: |
|
X-To: |
|
Date: |
Wed, 11 Feb 1998 12:50:37 -0800 |
Reply-To: |
|
Content-Transfer-Encoding: |
7bit |
Subject: |
|
From: |
|
X-cc: |
|
Content-Type: |
text/plain; charset=us-ascii |
Organization: |
Force Engineering |
MIME-Version: |
1.0 |
Parts/Attachments: |
|
|
I have found that Wonder Windows 95 has many problems, and this is one of
them.
Try taking out the modem and restart the computer.
goto my computer
select comtrol panel
select system
select device manager
select modem
single select the modem driver
select remove
power down the system and bring it back up
check to see that the drive is gone and power down if gone.
reinstall the modem card.
power up and hope that Wonder Windows 95 see the card.
You will not be able to install it properly unless it is Wonder Windows 95
sees it
at startup.
I hope you do not have to spend the three days of pain I had to.
Michael
Taylor, Chris H. wrote:
> I am at my wits end with my U.S.Robotics 33.6 Internal WinModem. I
> continue to get a message when attempting to run diagnosis from the
> "System" Program Group that reads "Unable to open Port". Windows 95 will
> simply not recognize the modem. I have reloaded Windows 95 as well as
> Winmodem, to no avail. I have tried uninstalling and reinstalling
> Winmodem and even edited out the program from REGEDIT in the uninstall/
> reinstall effort. The frustrating part is that it USED TO WORK!! Has
> anyone had similar problems with their Winmodem? I also went through the
> suggestions given by USR tech support to no avail. Is this just a piece
> of garbage that I should simply count my losses on and replace? Any
> feedback shall be appreciated.
>
> Chris Taylor
> Senior Printed Circuit Designer
> LXE, Inc.
> 125 Technology Parkway
> Norcross, GA 30092
> voice: (770) 447-4224 X3242
> fax: (770) 447-6928
> e-mail: [log in to unmask]
################################################################
DesignerCouncil E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe: SUBSCRIBE DesignerCouncil <your full name>
To unsubscribe: SIGNOFF DesignerCouncil
################################################################
Please visit IPC web site (http://jefry.ipc.org/forum.htm) for additional information.
For the technical support contact Dmitriy Sklyar at [log in to unmask] or 847-509-9700 ext.311
################################################################
|
|
|