Please take the modem help-line off line.

> -----Original Message-----
> From: Taylor, Chris H. [SMTP:[log in to unmask]]
> Sent: Wednesday, February 11, 1998 1:41 PM
> To:   [log in to unmask]
> Subject:      Re: [DC] U.S.Robotics WinModem: HELP!!
>
> No, I do not have that program. I thought that it might be a sound
> card
> conflict, so I removed the sound card, but to no avail. I'm beginning
> to
> think it's just a piece of junk and needs replacing.
> Chris Taylor
> Senior Printed Circuit Designer
> LXE, Inc.
> 125 Technology Parkway
> Norcross, GA 30092
> voice: (770) 447-4224 X3242
> fax: (770) 447-6928
> e-mail: [log in to unmask]
>
>
> >----------
> >From:  Joe Felts Jr.[SMTP:[log in to unmask]]
> >Sent:  Wednesday, February 11, 1998 2:12 PM
> >To:    [log in to unmask]
> >Subject:       Re: [DC] U.S.Robotics WinModem: HELP!!
> >
> >Are you using MS Outlook?
> >It's so-called "MAPI" interface is a fragile program that gets upset
> by
> >anything.
> >I used to get the same message after retrieving e-mail from Outlook
> and
> >then trying to launch my browser.
> >I had made the mistake of buying release 1 of MS-anything and, true
> to
> >form, it's loaded with bugs...  I got the latest Outlook patch from
> the MS
> >web site & it helped.  I still have occasional modem conflicts - now
> I just
> >re-boot.
> >
> >JF
> >
> >
> >Taylor, Chris H. wrote:
> >>
> >> I am at my wits end with my U.S.Robotics 33.6 Internal WinModem. I
> >> continue to get a message when attempting to run diagnosis from the
> >> "System" Program Group that reads "Unable to open Port".
> >
> >################################################################
> >DesignerCouncil E-Mail Forum provided as a free service by IPC using
> >LISTSERV 1.8c
> >################################################################
> >To subscribe/unsubscribe, send a message to [log in to unmask] with
> following
> >text in the body:
> >To subscribe:   SUBSCRIBE DesignerCouncil <your full name>
> >To unsubscribe:   SIGNOFF DesignerCouncil
> >################################################################
> >Please visit IPC web site (http://jefry.ipc.org/forum.htm) for
> additional
> >information.
> >For the technical support contact Dmitriy Sklyar at [log in to unmask] or
> >847-509-9700 ext.311
> >################################################################
> >
> >################################################################
> >DesignerCouncil E-Mail Forum provided as a free service by IPC using
> LISTSERV
> >1.8c
> >################################################################
> >To subscribe/unsubscribe, send a message to [log in to unmask] with
> following
> >text in the body:
> >To subscribe:   SUBSCRIBE DesignerCouncil <your full name>
> >To unsubscribe:   SIGNOFF DesignerCouncil
> >################################################################
> >Please visit IPC web site (http://jefry.ipc.org/forum.htm) for
> additional
> >information.
> >For the technical support contact Dmitriy Sklyar at [log in to unmask] or
> >847-509-9700 ext.311
> >################################################################
> >
> >
>
> ################################################################
> DesignerCouncil E-Mail Forum provided as a free service by IPC using
> LISTSERV 1.8c
> ################################################################
> To subscribe/unsubscribe, send a message to [log in to unmask] with
> following text in the body:
> To subscribe:   SUBSCRIBE DesignerCouncil <your full name>
> To unsubscribe:   SIGNOFF DesignerCouncil
> ################################################################
> Please visit IPC web site (http://jefry.ipc.org/forum.htm) for
> additional information.
> For the technical support contact Dmitriy Sklyar at [log in to unmask] or
> 847-509-9700 ext.311
> ################################################################

################################################################
DesignerCouncil E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe:   SUBSCRIBE DesignerCouncil <your full name>
To unsubscribe:   SIGNOFF DesignerCouncil 
################################################################
Please visit IPC web site (http://jefry.ipc.org/forum.htm) for additional information.
For the technical support contact Dmitriy Sklyar at [log in to unmask] or 847-509-9700 ext.311
################################################################