TECHNET Archives

January 1998

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
Reply To:
TechNet Mail Forum.
Date:
Thu, 8 Jan 1998 09:44:01 EST
Content-Type:
text/plain
Parts/Attachments:
text/plain (28 lines)
Gary,
Since I do high volumes of B-24 and B-36 testing, I use connectors vs.
Hardwiring.  The connector I use is an AMP part number 1-111212-1.  It is an
IDC connector, but I solder to the contacts and use larger diameter wires.  My
studies show about a 0.25 - 0.33 decade loss vs. hard wiring using these
connectors.  The connectors run about  $12-$14 each and are about a 6-8 week
lead time item.  I have some in stock if Charles is desperate.  Since the B-24
and the B-36 have the same contact finger layout, the same connector can be
used for either board.

I have a few ideas on designing connectors specifically for SIR testing.  Any
TechNet people interested in working with me on a new connector design?

Doug Pauls
CSL

##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe:   SUBSCRIBE TECHNET <your full name>
To unsubscribe:   SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional information.
For the technical support contact Dmitriy Sklyar at [log in to unmask] or 847-509-9700 ext.311
##############################################################


ATOM RSS1 RSS2