TECHNET Archives

January 1998

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
"Sheppard, Marty - LYPME" <[log in to unmask]>
Reply To:
TechNet E-Mail Forum.
Date:
Mon, 26 Jan 1998 13:44:12 -0500
Content-Type:
text/plain
Parts/Attachments:
text/plain (27 lines)
We have received a job that calls for a Mill Max press fit socket (P/N
0279-0-15-01-47-35-10-0) to be pressed into a 17 layer, 135 mil thick
printed circuit card.  The master drawing package specifies a FHS of
.063".  The widest dimension of the socket is .067" at the octogon
shaped portion of the top 1/3 of the shaft.  We were just wondering if
anyone has any experience with assembling such devices (i.e., integrity
of the PTH, etc).

Thanks,

Marty W. Sheppard / LYPME
Manufacturing Engineering Support
(912)-926-9632 DSN 468-9632 Fax: (912)926-7974
email:  [log in to unmask]

################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe:   SUBSCRIBE TechNet <your full name>
To unsubscribe:   SIGNOFF TechNet 
################################################################
Please visit IPC web site (http://jefry.ipc.org/forum.htm) for additional information.
For the technical support contact Dmitriy Sklyar at [log in to unmask] or 847-509-9700 ext.311
################################################################


ATOM RSS1 RSS2