Subject: | |
From: | |
Reply To: | TechNet E-Mail Forum. |
Date: | Sat, 24 Jan 1998 08:49:58 +0800 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
>Hello !
Hello!
>Can any one help us to provide the following informations regarding FR4
>laminates.
Let's see.....
>1. Is single sided 1.6mm thick 35 micron copper FR4 laminate available?
>Who manufacture this type?
Absolutely no problem. Even in India! Contact either 'PCS (in Pune)' or
'Sandur Laminates' in Bangalore. I have both company details in the office
(I'm home now). Low cost/grade FR4 35/0 is available in Delhi.
>2. FR4 can be punch able? Both holes (diameter 0.8 mm to 5 mm) and outer
>profile.
FR4 is basically outline punchable. 0.80mm holes can NOT be punched. You
need also a very good punch tool maintainance. FR4 is a glass material and
glass is harder then steel.
>3. If so, what type of tool is required? Who is the supplier of such tool?
Sorry, this one I donno.
>With regards and advance thanks,
>
>Kandasamy Chandrabose
Happy CHinese New Year!
Jens Behrens
The PCB Laminate FAQ: http://www.felsweb.com/lam_faq.htm
==========================================
Fels Ltd. URL HTTP://www.felsweb.com
GPO Box 8721 Tel.: +(852) 2423-1812
Hong Kong Fax.: +(852) 2423-1899
[log in to unmask]
==========================================
################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe: SUBSCRIBE TechNet <your full name>
To unsubscribe: SIGNOFF TechNet
################################################################
Please visit IPC web site (http://jefry.ipc.org/forum.htm) for additional information.
For the technical support contact Dmitriy Sklyar at [log in to unmask] or 847-509-9700 ext.311
################################################################
|
|
|