TECHNET Archives

January 1998

TechNet@IPC.ORG
Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
Re: air voids in multI
From:
Afri Singh <[log in to unmask]>
Reply To:
TechNet E-Mail Forum.
Date:
Fri, 23 Jan 1998 14:20:19 -0500
Content-Type:
TEXT/PLAIN
Parts/Attachments:
TEXT/PLAIN (20 lines) 
Thank you for the advise Colin.  We are using 2 sheets of 7628 on either
side and the pressure is 250 PSI -we did try up to 350
Heat rise is 12 F/min with new paco-pads and 16 when using 1 new with one
old paco -pad.   measurements were done by placing the thermocouple between
the 2 sheets of pre-preg on the top and bottom panel
    i will slow down the heat rise futher as suggested by all of you
thank you

################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe:   SUBSCRIBE TechNet <your full name>
To unsubscribe:   SIGNOFF TechNet 
################################################################
Please visit IPC web site (http://jefry.ipc.org/forum.htm) for additional information.
For the technical support contact Dmitriy Sklyar at [log in to unmask] or 847-509-9700 ext.311
################################################################

ATOM RSS1 RSS2