Ed,

We use GC-Cam from Graphi-Code.  Based on the gerber & drill files that I
get from our customers, it seems that alot of designers are using CAM350 to
do their post-CAD clean-up and verification.

Rick - Electronic Service & Design


At 01:57 PM 1/22/98 -0600, you wrote:
>This Is  just an informal survey regarding what is the most common cam
software used by board shops today. I would appreciate all responses from
other board shops as to what software you are using.
>
>Thank you,
>
>Ed Cosper
>
>##############################################################
>TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
>##############################################################
>To subscribe/unsubscribe, send a message to [log in to unmask] with following
text in the body:
>To subscribe:   SUBSCRIBE TECHNET <your full name>
>To unsubscribe:   SIGNOFF TECHNET
>##############################################################
>Please visit IPC web site (http://www.ipc.org/html/forum.htm) for
additional information.
>For the technical support contact Dmitriy Sklyar at [log in to unmask] or
847-509-9700 ext.311
>##############################################################
>
>

##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe:   SUBSCRIBE TECHNET <your full name>
To unsubscribe:   SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional information.
For the technical support contact Dmitriy Sklyar at [log in to unmask] or 847-509-9700 ext.311
##############################################################