drilbert wrote:-
>Is anyone using the Pluratec (or other suppliers') panel stack taping
>equipment, for building stacks for the drill machine?

The Pluritec machine is simple and effective but your stacks will need
to be neat with no variation between panels, entry, and backup. The tape
does not overlap onto the top surface by much and so the entry must come
to the edge of the stack. This is to avoid the tape interfering with the
drilling. It should be capable of taping up to a 10mm thick stack.
Regards
Paul Gould
[log in to unmask]
Isle of Wight,UK

##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe:   SUBSCRIBE TECHNET <your full name>
To unsubscribe:   SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional information.
For the technical support contact Dmitriy Sklyar at [log in to unmask] or 847-509-9700 ext.311
##############################################################