Thank You Everyone for all of your comments on ovens!!!  It was greatly
appreciated!!

Just to let everyone know we have selected the Electrovert Omniflow 10
with extended cooling, standard inert, and the flux management system.

I ran extensive profile tests on their system in Dallas and the delta T
was .5 to 1 degree C.  (The Conceptronics was the same, but we were not
too impressed with the available service.)
The system can handle a load very well, which is critical for us since
we currently have 4 Pick and Place machines feeding one oven, and we are
getting ready to add 4 more (total of 8 feeding one oven).
We also needed a system which would gather the flux residue in a central
location and could be cleaned while the oven was running.  Electroverts
flux management system was able to do this.
We also needed a system which performed consistantly day to day and
machine to machine, and the electrovert did this.
And last, but not least, we also needed a system which would be
supported on a consistant basis here in So. Ca. as well as in Ireland,
and electrovert could do this as well.


Again, Thank You everyone!!

Kathy Palumbo

##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe:   SUBSCRIBE TECHNET <your full name>
To unsubscribe:   SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional information.
For the technical support contact Dmitriy Sklyar at [log in to unmask] or 847-509-9700 ext.311
##############################################################